sgroup July 2009

sgroup@lists.sgroup.ca

17 participants
10 discussions

by kevin kelley

hello I have read that when an improper mouse has been plugged in that it can cause the mouse port on the Roland SXXX to fail or no longer work properly. Is there an easy way to fix this issue ?

14 years, 11 months

S760 RGB to scart cable? Sync lines to make own lead?

by JH

I've posted this up on the yahoo group, but i'll run it again here..... I've contacted a tech with regards to wiring up a lead for my S760 to come out from to RGB socket and then to go to a SCART socket..... This is all really above my head, but my tech is asking questions with regards to SYNC lines..... as i said it means nothing to me, but i did show them the S760 monitor page in my manual, and also the very useful S760 webpage- monitor link.... http://myweb.tiscali.co.uk/clouzeau/s760/monitor.htm My tech is asking: "The main question would be, what to do about the VSYNC and HSYNC lines with regards to SCART. It expects a combined composite sync. Really it's just the working pinouts that we need. I've had a look on that S760 monitor page, but there's no definite information regarding SCART. TTL is also 5v digital. SCART is 1v p2p." This means nothing to me.... but can someone please help out if they know the info needed? Its just to wire an RGB lead to SCART socket for the S760..

14 years, 12 months

Intro, DJ-70mkii

by t'byte

Hello List, I just recently joined, and appreciate the presence of this list and the archives so much. I started into the Roland sampler world with a 2nd-hand S-750 two years ago. Later I picked up an S-760. Last week I found a DJ-70mkii. If anyone can help me get the operating system upgraded on the DJ-70mkii, I would be very grateful. I saw on the net that the DJ-70 could boot from an updated operating system if you had the proper boot floppy in the drive on power-up. I can't find any such floppy anywhere. Haven't called Roland US to see if they have the EPROMs in stock still, would that be worth a shot? I currently have v1.00 of the OS, and it seems like it can read Zip and Jaz drives fine, but I'm kinda scared of getting too comfortable and then losing some work. Thanks Tim

15 years

ROLAND S-10 SAMPLER EPROM versions

by Carlos Hernanz (hcarlos)

Hi everyone, I've recently purchased an old roland S-10 sampler and found that it's rom version it's 1.07. It seems not to support sysex so I really need to upgrade it to a newer version. Do you guys know where can I find either: 1) EPROM upgrade to purchase 2) EPROM binary files of the operating system of the S-10, for me to burn a new eprom? Thanks in advance,

15 years

New W-30 owner!

by Damian

Hello! I have ordered the SCSI upgrade for my W-30. Any suggestions on where to source the right type of external scsi cdrom unit and external scsi hard drive that will work with the W-30? Cheers! Damian.

15 years

Re: S760 RGB to scart cable? Sync lines to make own lead? (Peter Ullrich)

by "Oliver Löbbert"

Hi Peter, where can i find the Schematic? On your webseite? Greetz Oliver -------- Original-Nachricht -------- > Datum: Sat, 11 Jul 2009 12:00:02 -0400 (EDT) > Von: sgroup-request(a)sgroup.ca > An: sgroup(a)sgroup.ca > Betreff: sgroup Digest, Vol 37, Issue 7 > Send sgroup mailing list submissions to > sgroup(a)sgroup.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.sgroup.ca/mailman/listinfo/sgroup > or, via email, send a message with subject or body 'help' to > sgroup-request(a)sgroup.ca > > You can reach the person managing the list at > sgroup-owner(a)sgroup.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of sgroup digest..." > > > Today's Topics: > > 1. Re: S760 RGB to scart cable? Sync lines to make own lead? > (Peter Ullrich) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 8 Jul 2009 09:42:11 +0200 > From: Peter Ullrich <synpro(a)networld.at> > Subject: Re: [sgroup] S760 RGB to scart cable? Sync lines to make own > lead? > To: JH <johnplaiduk(a)yahoo.co.uk>, sgroup(a)sgroup.ca > Message-ID: <1247038931.4a544dd3aebc7(a)webmail.networld.at> > Content-Type: text/plain; charset="us-ascii" > > Hi John! > > I made a schematic that should work as S760 to SCART Interface. > If you try it out please let us know if it works! > > Ciao > Peter > > \|/ > (o o) > --oOOO--(_)--OOOo------------------------------------------------------ > Ing. Peter Ullrich > Hardware & Software Developer / Electronic Musician > Private Homepage: http://come.to/ullrich > .oooO > ( ) Oooo. > \ ( ( ) > -----\_)----) /-------------------------------------------------------- > (_/ > > ---------------------------------- > Ein Service von http://www.news.at > > ------------------------------ > > _______________________________________________ > sgroup mailing list > sgroup(a)sgroup.ca > http://www.sgroup.ca/mailman/listinfo/sgroup > See http://www.generalconcepts.com/sgroup/ for more information. > > End of sgroup Digest, Vol 37, Issue 7 > *************************************

15 years

Free s-330 for parts

by kevin kelley

I have a s-330 that I had removed the drive from for another this unit is taken apart and I will put it back together somewhat if needed but if you need parts everything worked 100% before I took out the drive. Free to a good home. My zip code is 33701 buyer only needs to pay for shipping. Kevin Kelley p.s. I also have the systems disk.

15 years

Roland S-series questions S-550, S-330, etc.

by emailit2＠aol.com

I am curious if one might be able to install a zip drive, or compact flash type reader/writer into the S-550. Has anyone tried to install anything other than the standard floppy drive into a S-550, might it be possible? Also, anyone know about the sequencer software, and dongle for the S-series units. I believe they are labeled for use with their intended sampler model, but could, and or is the software, and dongles interchangeable with other models? Any insight is greatly appreciated. Thanks in advance. Dave

15 years

Roland S-10 repair/parts - QD drive needs new belt

by Joshua Homme

Hello, anyone have a line on where I can get a new belt? I attached a pic of the Quick Disk drive removed from the synth. You can see it wraps around the small brass gear to the large plastic gear. I'm assuming any belt will do as long as its a "belt" and not a rubber band and its the correct tension and length. If anyone has any info where I can get one or two or three, that would be great! Thank you. _________________________________________________________________ Internet explorer 8 lets you browse the web faster. http://go.microsoft.com/?linkid=9655582

15 years

RE: Roland S-series questions S-550, S-330, etc.

by Jean-Robert Harvey

> > Also, anyone know about the sequencer software, and dongle for the S-series > units. I believe they are labeled for use with their intended sampler model, > but could, and or is the software, and dongles interchangeable with other > models? The sequencer package comes in two models: SYS-333 and SYS-553. That is both software and dongle are model specific. You can't actually use SYS-333 with an S-550 sampler. I learned this the hard way. I bought the SYS-333 on eBay and tried to use the dongle with a copy of 553 software. All I got is an error message stating incorect dongle. The sequencer package is a fine piece of software. It allows you to create a sequence and embed sample within it. You can then share your sequence disks with other S-sampler owners. The dongle is only needed for write operations, not for reading. Hope that helps, Jean-Robert

15 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

sgroup July 2009