12 Sep
2013
12 Sep
'13
10:49 p.m.
Most likely the belt is goo.
I repaired an S-10 QD last summer with one of these: FBS9.0 Flat Belt,
Small 9.0 Inch from AVCR Electronics.
http://www.turntableneedles.com/Flat-Belt-Small-90-Inch_p_512.html
You'll want to google for some instructions/videos on taking the drive
apart, it's not terribly hard, but needs care to put things back in
the right places/order.
Good luck!
On Thu, Sep 12, 2013 at 6:14 PM, Sweetsynthchuck
<sweetsynthchuck(a)yahoo.com> wrote:
Hi list,
Any advice on repairing my qd drive?
The disks when inserted, i hear the drive make a constant noise but the actual qd does
not get latched and i dont hear it spin, any advice to allow me to get her back up and
running?
Thanks
_______________________________________________
Sent by the sgroup mailing list
sgroup(a)sgroup.ca
For subscribe/unsubscribe: http://lists.sgroup.ca/mailman/listinfo/sgroup
See http://www.generalconcepts.com/sgroup/ for more information.