14 May
2006
14 May
'06
9:30 p.m.
agreed...I get this from time to time and without thinking I just start
changing termination combinations until I get it to boot.
-----Original Message-----
From: sgroup-bounces+stevelanday=yahoo.com(a)sgroup.ca
[mailto:sgroup-bounces+stevelanday=yahoo.com@sgroup.ca]On Behalf Of
Bernie Maier
Sent: Sunday, May 14, 2006 9:02 PM
To: sgroup(a)sgroup.ca
Subject: Re: [sgroup] SCSI HD won't boot
Dave:
Everytime I boot up my SCSI HD connected to my S-760
it always stop during
one of the ID detection and never completes the boot process.
Whether it's the SCSI Maxor, WD or whatever.
Any suggestions?
At this stage I can only suggest the usual SCSI voodoo: check there isn't
an ID conflict, and check that the SCSI chain is correctly terminated.
Cheers,
Bernie
_______________________________________________
Sent by the sgroup mailing list
sgroup(a)sgroup.ca
For subscribe/unsubscribe: http://www.sgroup.ca/mailman/listinfo/sgroup
See http://www.generalconcepts.com/sgroup/ for more information.