22 Nov
2009
22 Nov
'09
5:50 p.m.
Hi Folks,
I pushed up my machinepark with a S760 sampler, with 32mb and OP-760, running OS V2.24
My old W30 goes now in retirement pension.
So my question goes to the following: I have read something about to import W30 Disks into
S760.
Will this functionality only supports the Waves of W30, or is it possible to import the
completely Patches with all parameters?
Other Question goes to the SCSII Drive:
I have a 2160 MB Drive. Is there a chance, to use the rest of the MBs, or is it just the
way, to use the first 600 MB and no else?
Thanx for your comments,
with regards
Oliver from germany
22 Nov
22 Nov
8:04 p.m.
First 600mb only.
Maybe you could create another volume on it somehow - not sure - but
each is only 600mb
At 11/22/2009 02:50 PM, werbemuelleimer(a)gmx.net wrote:
Hi Folks,
I pushed up my machinepark with a S760 sampler, with 32mb and
OP-760, running OS V2.24
My old W30 goes now in retirement pension.
So my question goes to the following: I have read something about to
import W30 Disks into S760.
Will this functionality only supports the Waves of W30, or is it
possible to import the completely Patches with all parameters?
Other Question goes to the SCSII Drive:
I have a 2160 MB Drive. Is there a chance, to use the rest of the
MBs, or is it just the way, to use the first 600 MB and no else?
Thanx for your comments,
with regards
Oliver from germany
_______________________________________________
Sent by the sgroup mailing list
sgroup(a)sgroup.ca
For subscribe/unsubscribe: http://www.sgroup.ca/mailman/listinfo/sgroup
See http://www.generalconcepts.com/sgroup/ for more information.
Dennis Barton <db(a)skylab2000.com>
Brainforest Productions, Los Angeles
23 Nov
23 Nov
10:58 a.m.
Am 22.11.2009 um 23:50 schrieb werbemuelleimer(a)gmx.net:
So my question goes to the following: I have read
something about
to import W30 Disks into S760.
Will this functionality only supports the Waves of W30, or is it
possible to import the completely Patches with all parameters?
I can only speak for S-330, but I guess w30 is pretty much the same.
Yes, it does import the parameters too. Here's a posting of mine on
this group about ten years ago :-)
It can read S-550, S-330 and W-30 disks, that's
why I got my S-760
back
then (had some boxes full of those disks). But IMHO it doesn't this
job
too well: if there are two Tones layered in a S-330 Patch, *two* S-760
Patches are created. And, since the S-760 has no Sub-Tones, each
Sub-Tone is converted into a real Sample/Partial. If the Start/Loop/
End
points of the Original Tone and Sub-Tone are the same, this could be
done more memory-efficiently.
Don't know about S-50 disks, the User's Manual doesn't mention it. But
with a S-330 or S-550 these disks can be converted to S-330/S-550
format. Wasn't there a DOS program that does this too?
Also note that the S-330 has more flexible envelopes than the S-760.
Keep your W30 at least until you have all your disks converted, so if
in doubt you can compare.
Ingo
5507
days inactive
5508
days old
2 comments
3 participants
participants (3)
-
dennis barton -
Ingo Debus -
werbemuelleimer＠gmx.net