QD drive repair - sgroup - mailman.syonex.com

List overview All Threads
Download

QD drive repair

S330 and USB Drive ?

S550 SCSI

Sweetsynthchuck

12 Sep 2013 12 Sep '13

7:14 p.m.

Hi list, Any advice on repairing my qd drive? The disks when inserted, i hear the drive make a constant noise but the actual qd does not get latched and i dont hear it spin, any advice to allow me to get her back up and running? Thanks

Reply

Show replies by date

Pete Hartman

12 Sep 12 Sep

10:49 p.m.

Most likely the belt is goo. I repaired an S-10 QD last summer with one of these: FBS9.0 Flat Belt, Small 9.0 Inch from AVCR Electronics. http://www.turntableneedles.com/Flat-Belt-Small-90-Inch_p_512.html You'll want to google for some instructions/videos on taking the drive apart, it's not terribly hard, but needs care to put things back in the right places/order. Good luck! On Thu, Sep 12, 2013 at 6:14 PM, Sweetsynthchuck <sweetsynthchuck(a)yahoo.com> wrote:

Hi list, Any advice on repairing my qd drive? The disks when inserted, i hear the drive make a constant noise but the actual qd does not get latched and i dont hear it spin, any advice to allow me to get her back up and running? Thanks _______________________________________________ Sent by the sgroup mailing list sgroup(a)sgroup.ca For subscribe/unsubscribe: http://lists.sgroup.ca/mailman/listinfo/sgroup See http://www.generalconcepts.com/sgroup/ for more information.

Reply

Sweetsynthchuck

15 Sep 15 Sep

7:28 a.m.

Thanks, i could not find any videos or really any information about what to do, however i guess i will have to open her up and take a peak, out of interest if i cannot get her fixed up is there any librarians for any of the s series samplers with QD? Thanks ________________________________ From: Pete Hartman <pete.hartman(a)gmail.com> To: Sweetsynthchuck <sweetsynthchuck(a)yahoo.com> Cc: "sgroup(a)sgroup.ca" <sgroup(a)sgroup.ca> Sent: Friday, September 13, 2013 3:49 AM Subject: Re: [sgroup] QD drive repair Most likely the belt is goo. I repaired an S-10 QD last summer with one of these: FBS9.0 Flat Belt, Small 9.0 Inch from AVCR Electronics. http://www.turntableneedles.com/Flat-Belt-Small-90-Inch_p_512.html You'll want to google for some instructions/videos on taking the drive apart, it's not terribly hard, but needs care to put things back in the right places/order. Good luck! On Thu, Sep 12, 2013 at 6:14 PM, Sweetsynthchuck <sweetsynthchuck(a)yahoo.com> wrote:

Hi list, Any advice on repairing my qd drive? The disks when inserted, i hear the drive make a constant noise but the actual qd does not get latched and i dont hear it spin, any advice to allow me to get her back up and running? Thanks _______________________________________________ Sent by the sgroup mailing list sgroup(a)sgroup.ca For subscribe/unsubscribe: http://lists.sgroup.ca/mailman/listinfo/sgroup See http://www.generalconcepts.com/sgroup/ for more information.

Reply

Pete Hartman

10:28 a.m.

Here are some of the links I have for the S-10 that were useful. http://web.archive.org/web/20000819003244/www.lilchips.com/roland/samplers/… http://www.synthzone.com/midi/roland/s10/s10man/s10manager.htm#C (I was not able to get this software to work, but I have a mac) http://elektrotanya.com/roland_s-10.pdf/download.html http://www.synthzone.com/midi/roland/s10/s10man/ http://web.archive.org/web/19990203062301/http://apollo.lpg.fi/S-10/ I don't know if yours is an S-10 or what, but those might give some clues about where you might try to find similar info for other related keyboards. On Sun, Sep 15, 2013 at 6:28 AM, Sweetsynthchuck <sweetsynthchuck(a)yahoo.com> wrote:

Thanks, i could not find any videos or really any information about what to do, however i guess i will have to open her up and take a peak, out of interest if i cannot get her fixed up is there any librarians for any of the s series samplers with QD? Thanks ________________________________ From: Pete Hartman <pete.hartman(a)gmail.com> To: Sweetsynthchuck <sweetsynthchuck(a)yahoo.com> Cc: "sgroup(a)sgroup.ca" <sgroup(a)sgroup.ca> Sent: Friday, September 13, 2013 3:49 AM Subject: Re: [sgroup] QD drive repair Most likely the belt is goo. I repaired an S-10 QD last summer with one of these: FBS9.0 Flat Belt, Small 9.0 Inch from AVCR Electronics. http://www.turntableneedles.com/Flat-Belt-Small-90-Inch_p_512.html You'll want to google for some instructions/videos on taking the drive apart, it's not terribly hard, but needs care to put things back in the right places/order. Good luck! On Thu, Sep 12, 2013 at 6:14 PM, Sweetsynthchuck <sweetsynthchuck(a)yahoo.com> wrote:

Hi list, Any advice on repairing my qd drive? The disks when inserted, i hear the drive make a constant noise but the actual qd does not get latched and i dont hear it spin, any advice to allow me to get her back up and running? Thanks _______________________________________________ Sent by the sgroup mailing list sgroup(a)sgroup.ca For subscribe/unsubscribe: http://lists.sgroup.ca/mailman/listinfo/sgroup See http://www.generalconcepts.com/sgroup/ for more information.

_______________________________________________ Sent by the sgroup mailing list sgroup(a)sgroup.ca For subscribe/unsubscribe: http://lists.sgroup.ca/mailman/listinfo/sgroup See http://www.generalconcepts.com/sgroup/ for more information.

Reply

4218

days inactive

4221

days old

sgroup@lists.sgroup.ca

Manage subscription

3 comments

2 participants

tags (0)

participants (2)

Pete Hartman
Sweetsynthchuck