Novice: Well, for starters you have no choice but to put an S-760 at each end of the SCSI chain, because they only have one SCSI connecter each. Then, assuming the drive is in an external enclosure, that will go between the two of them. You are aware that the S-760 uses its own format on the hard drive? That is, you can't just share the drive with Windows or Mac OS. Everything must have different SCSI IDs, so set the SCSI IDs on your samplers before they are connected in the same SCSI chain. Make sure you never get into a situation where both S-760s attempt to write to the drive at the same time. In fact, I'd probably even avoid writing to the drive altogether while both S-760s are running, just to be paranoid. Cheers, Bernie