14 May
2006
14 May
'06
2:48 p.m.
Hey guys
Everytime I boot up my SCSI HD connected to my S-760 it always stop
during one of the ID detection and never completes the boot process.
Whether it's the SCSI Maxor, WD or whatever.
Any suggestions?
Thanks
Dave
14 May
14 May
9:02 p.m.
Dave:
Everytime I boot up my SCSI HD connected to my S-760
it always stop during
one of the ID detection and never completes the boot process.
Whether it's the SCSI Maxor, WD or whatever.
Any suggestions?
At this stage I can only suggest the usual SCSI voodoo: check there isn't
an ID conflict, and check that the SCSI chain is correctly terminated.
Cheers,
Bernie
9:05 p.m.
One SCSI HD but termination bypasses SCSI ID so I have to leave it off.
No conlfict.
Thanks
Dave
lister-sgroup(a)blurk.net wrote:
Dave:
Everytime I boot up my SCSI HD connected to my
S-760 it always stop
during
one of the ID detection and never completes the boot process.
Whether it's the SCSI Maxor, WD or whatever.
Any suggestions?
At this stage I can only suggest the usual SCSI voodoo: check there isn't
an ID conflict, and check that the SCSI chain is correctly terminated.
Cheers,
Bernie
_______________________________________________
Sent by the sgroup mailing list
sgroup(a)sgroup.ca
For subscribe/unsubscribe: http://www.sgroup.ca/mailman/listinfo/sgroup
See http://www.generalconcepts.com/sgroup/ for more information. 
9:30 p.m.
agreed...I get this from time to time and without thinking I just start
changing termination combinations until I get it to boot.
-----Original Message-----
From: sgroup-bounces+stevelanday=yahoo.com(a)sgroup.ca
[mailto:sgroup-bounces+stevelanday=yahoo.com@sgroup.ca]On Behalf Of
Bernie Maier
Sent: Sunday, May 14, 2006 9:02 PM
To: sgroup(a)sgroup.ca
Subject: Re: [sgroup] SCSI HD won't boot
Dave:
Everytime I boot up my SCSI HD connected to my S-760
it always stop during
one of the ID detection and never completes the boot process.
Whether it's the SCSI Maxor, WD or whatever.
Any suggestions?
At this stage I can only suggest the usual SCSI voodoo: check there isn't
an ID conflict, and check that the SCSI chain is correctly terminated.
Cheers,
Bernie
_______________________________________________
Sent by the sgroup mailing list
sgroup(a)sgroup.ca
For subscribe/unsubscribe: http://www.sgroup.ca/mailman/listinfo/sgroup
See http://www.generalconcepts.com/sgroup/ for more information.
6578
days inactive
6579
days old
3 comments
3 participants
participants (3)
-
Bernie Maier -
Dave -
Steve Landay